Quartzcolor is a Cosmolight brand Quartzcolor
a Cosmolight brand

Studio LED X Series

RETROFIT KIT 150W FOR STUDIO FRESNEL 1kW

The RETROFIT KIT allows to quickly and easily upgrade QUARTZCOLOR BAMBINO and STUDIO Fresnel spotlights with new energy efficient LED technology.

An extremely cost-effective solution to significantly reduce operational and maintenance costs without changing the existing layout and removing the fixtures from their suspension system.

Just remove four screws to separate the top of the housing from the bottom and replace the whole bottom part with the new one preassembled with LED engine. 
New labels and plates are supplied together with the kit.


Investing in LED fixtures will bring immediate benefits in terms of savings: dramatically reduced power consumption50,000+ hours LED engine life vs 150 hours of a traditional halogen lamp, reduced AC requirementsno dimmers required, practically no maintenance and spare parts required thanks to the lack of heat.


Product Code LD27252T/1 LD27252D/1
Category Studio LED X Series

RETROFIT KIT 150W FOR STUDIO FRESNEL 1kW

LD27252T/1 LD27252D/1

  • LCD GRAPHIC DISPLAY

    High-resolution LCD graphic display to operate and control system status, LED internal temperature, current DMX settings, dimming level both in remote and manual mode, and display standby.

  • BUILT-IN UNIVERSAL POWER SUPPLY

    More compact for easy operation.

  • ON-BOARD CONTROL

    On-board potentiometer to control the dimming level. 

  • ON-BOARD DMX RDM CONTROL

    The RDM standard provides bi-directional feedback and the possibility to remotely assign and address all the fixtures in a DMX network. 

  • 16-bit ELECTRONIC DIMMING

    Fully dimmable 0-100%. The 16-bit electronic driver ensures accurate and precise dimming.

  • ON-BOARD USB-PORT

    On-board USB port for firmware upgrade, diagnostic testing and parameters setting via PC dedicated software.


  • Optimised combination of steel, die cast and aluminium for both sturdiness and lightweight
  • High-quality epoxy powder coating protects against corrosion
  • Side mounted pole operated focus mechanism easily repositioned to manual use
  • Stainless steel wire focus system for a smooth and precise focusing action, maintenance-free
  • High-efficiency convection cooling, super silent fan, 3 presetting fan speed
  • Easy to service and maintain
  • CE mark
  • Designed and manufactured in Italy

Ordering Codes

LD27252T/1 – Retrofit kit 150W Tungsten for Studio Fresnel 1kW supplied with upgrade label kit

LD27252D/1 – Retrofit kit 150W Daylight for Studio Fresnel 1kW supplied with upgrade label kit


RETROFIT KIT 150W FOR STUDIO FRESNEL 1kW

LD27252T/1 LD27252D/1

Operational Data

Power consumption

150 W

Supply voltage

100 – 260 Vac, 50 – 60 Hz, autosensing
Power factor (cosα) 0.97
Focus adjustment

Stainless steel, maintenance-free wire focus mechanism with a wire and pulley push/pull carriage travel system for spot and flood

Side mounted pole operated focus mechanism

IP rating

IP 20

Max operating ambient temperature

0° – 40°

Optical Data

Beam angle

15° to 43° (3200 K)

15° to 44° (5600 K)

Correlated color temperature Fixed 3200 K / 5600 K
CRI > 90

Mechanical Data

Finish

Black high-quality epoxy powder coating

Special extra high-temperature treatment in critical areas

External textured low gloss finish

Electrical

Dimming Electronic 16-bit, 0 – 100 % fully adjustable
Control Local via potentiometer
Remote via DMX-RDM
Setting, addressing and testing via control panel, via RDM, and via USB port                                              
Connections

DMX In and Through 5-Pin XLR

USB port for firmware and software upgrade 

Cabling

In-line switch 8 A / 250 V, 5 m bare ended cable, 3 x 1.5 mm2 section cable
Plugs and cables upon request

Dimensions

Weight 

4.9 kg manual version


Photometrics

Typical performance based on 3200 K
Spot (15°)
Distance (m) 3 4 5 7 9
Lux 3,970 2,233 1,429 729 441
Beam Ø (m) 0.79 1.05 1.32 1.84 2.37
Flood (43°)
Distance (m) 3 4 5 7 9
Lux 1,350 759 486 248 150
Beam Ø (m) 2.36 3.15 3.94 5.51 7.09

 

Typical performance based on 5600 K
Spot (15°)
Distance (m) 3 4 5 7 9
Lux 4,700 2,644 1,692 863 522
Beam Ø (m) 0.79 1.05 1.32 1.84 2.37
Flood (44°)
Distance (m) 3 4 5 7 9
Lux 1,560 878 562 287 173
Beam Ø (m) 2.42 3.23 4.04 5.66 7.27

 


RETROFIT KIT 150W FOR STUDIO FRESNEL 1kW

Data sheet
Retrofit kit 150W for Studio Fresnel 1kW

Get more information about this product!

Speak with us about any other questions you might have.


I Agree the Privacy Policy of this site *