Quartzcolor is a Cosmolight brand Quartzcolor
a Cosmolight brand

Studio LED X Series

STUDIO LED X3 - LED FRESNEL 90W TUNGSTEN

The STUDIO LED X SERIES range combines the matchless features of the renowned QUARTZCOLOR Fresnel spotlights with the advantages of the LED technology innovation.

A high performing professional LED Fresnel spotlight range whose light output is equivalent to a traditional halogen source and permits a one-for-one replacement without compromises in the quality of the light: same brightness, same smoothness, same even and shadowless illumination as a traditional Fresnel spotlight.


Investing in LED fixtures brings immediate benefits in terms of savings: dramatically reduced power consumption, 50,000+ hours LED engine life vs 150 hours of a traditional halogen lamp, reduced AC requirements, no dimmers required, practically no maintenance and spare parts required thanks to the lack of heat.

 


Product Code LD27642T
Category Studio LED X Series

STUDIO LED X3 - LED FRESNEL 90W TUNGSTEN

LD27642T

  • LCD GRAPHIC DISPLAY

    High-resolution LCD graphic display to operate and control system status, LED internal temperature, current DMX settings, dimming level both in remote and manual mode, and display standby.

  • BUILT-IN UNIVERSAL POWER SUPPLY

    More compact for easy operation.

  • ON-BOARD CONTROL

    On-board potentiometer to control the dimming level. 

  • DMX CONTROL

    DMX control by XLR5 IN and THROUGH connectors.

  • 16-bit ELECTRONIC DIMMING

    Fully dimmable 0 – 100 %. The 16-bit electronic driver ensures accurate and precise dimming.


  • Lightweight and compact, ideal for location work and architectural applications
  • Optimised combination of die cast and aluminium for both sturdiness and lightweight
  • High-quality epoxy powder coating protects against corrosion
  • Scratch resistant black non-reflective housing
  • Specifically designed optics with large size lens
  • Side mounted pole operated focus mechanism easily repositioned to manual use
  • High-efficiency convection cooling, super silent fan, 3 presetting fan speed
  • Easy running accessory support brackets and lower accessory support bracket fitted with barndoor safety catch (extra safety)
  • Spring loaded top hinged bracket for very quick opening and closing, and for easy accessory fitting and removal
  • Easy to service and maintain
  • Compatibility of parts throughout the range
  • CE mark
  • Designed and manufactured in Italy

Ordering Codes

LD27640T – Studio LED X3 Fresnel 90W CCT Tungsten MO supplied with manual stirrup, stainless steel safety mesh, four-leaf rotating barndoor

LD27642T - Studio LED X3 Fresnel 90W CCT Tungsten PO supplied with pole operated stirrup, stainless steel safety mesh, four-leaf rotating barndoor


STUDIO LED X3 - LED FRESNEL 90W TUNGSTEN

LD27642T

Operational Data

Power consumption

90 W

Supply voltage

100 – 260 Vac, 50 – 60 Hz, autosensing
Power factor (cosα) 0.97

Tilt adjustment

Pivot located at centre of gravity for excellent balance and positive locking

Tilt recommended angle of use

-90° / 0° / 90°
Focus adjustment

Stainless steel, maintenance-free wire focus mechanism with a wire and pulley push/pull carriage travel system 
Side mounted pole operated focus mechanism

Accessory fitting

Spring loaded top hinged bracket

Lower accessory support bracket fitted with barndoor safety catch (extra safety)

Barndoor diameter

200 mm

Colour frame/scrim set diameter

202 mm

Filter cut size diameter

197 mm

Safety mesh

Stainless steel safety mesh 25 mm x 25 mm

IP rating

IP 20

Max operating ambient temperature

0° – 40°

Optical Data

Lens

Fresnel 130 mm Ø, low expansion borosilicate Fresnel lens on spring Teflon supports

Beam angle

21° to 68°
Correlated color temperature 3200 K
CRI > 90

Mechanical Data

Finish

Black high-quality epoxy powder coating

Special extra high-temperature treatment in critical areas

External textured low gloss finish

MO mounting

Manual U-shaped stirrup with lateral thrust bearing and lock off knob for quick and secure locking, 28 mm (1 1/8”)

PO mounting

Pole Operated U-shaped stirrup, pan & tilt clutch gear mechanism for manual override, 28 mm (1 1/8") spigot

Electrical

Dimming Electronic 16-bit, 0 – 100 % fully adjustable
Control Local via potentiometer
Remote via DMX
Setting, addressing and testing via control panel
Connections DMX In and Through 5-Pin XLR
MO version

In-line switch 8 A / 250 V, 5 m bare ended cable, 3 x 1.5 mm2 section cable
Plugs and cables upon request

PO version

2 m bare ended, 3 x 1.5 mmsection cable

Plugs and cables upon request

Dimensions

Weight (head)

5.3 kg manual version

6.4 kg pole op version 

Packed volume

520 mm x 420 mm x 520 mm 


Photometrics

Spot (21°)
Distance (m) 3 4 5 7 9
Lux 2,060 1,159 742 378 229
Beam Ø (m) 1.11 1.48 1.85 2.59 3.34
Flood (68°)
Distance (m) 3 4 5 7 9
Lux 590 332 212 108 66
Beam Ø (m) 4.05 5.40 6.75 9.44 12.14
Typical performance based on 3200 K

STUDIO LED X3 - LED FRESNEL 90W TUNGSTEN

LD27642T

28846

Four-leaf rotating barndoor - 200 mm Ø

28849

Colour frame - 260 mm Ø

28844

Scrim set (one double, one single scrim, one half double scrim, one half single scrim) - 260 mm Ø

C100

Junior pipe clamp with 28 mm socket

FF3870

Steel safety cable 2.5 mm Ø - 70 cm lenght

1004BAC

Aluminium stand, 3 risers, 124/366 cm, air cushioned, 16 mm spigot, black, 9 kg load

1005BAC

Aluminium stand, 2 risers, 118/273 cm, air cushioned, 16 mm socket, black, 10 kg load


STUDIO LED X3 - LED FRESNEL 90W TUNGSTEN

Catalogue
Studio LED X Series
Data sheet
Studio LED X3

Get more information about this product!

Speak with us about any other questions you might have.


I Agree the Privacy Policy of this site *