Quartzcolor is a Cosmolight brand Quartzcolor
a Cosmolight brand

Studio LED X Series

RETROFIT KIT 200W FOR STUDIO FRESNEL 2kW

The RETROFIT KIT allows to quickly and easily upgrade QUARTZCOLOR BAMBINO and STUDIO Fresnel spotlights with new energy efficient LED technology.

An extremely cost-effective solution to significantly reduce operational and maintenance costs without changing the existing layout and removing the fixtures from their suspension system.

Just remove four screws to separate the top of the housing from the bottom and replace the whole bottom part with the new one preassembled with LED engine. 
New labels and plates are supplied together with the kit.


Investing in LED fixtures will bring immediate benefits in terms of savings: dramatically reduced power consumption50,000+ hours LED engine life vs 150 hours of a traditional halogen lamp, reduced AC requirementsno dimmers required, practically no maintenance and spare parts required thanks to the lack of heat.


Product Code LD27262T/1 LD27262D/1
Category Studio LED X Series

RETROFIT KIT 200W FOR STUDIO FRESNEL 2kW

LD27262T/1 LD27262D/1

  • LCD GRAPHIC DISPLAY

    High-resolution LCD graphic display to operate and control system status, LED internal temperature, current DMX settings, dimming level both in remote and manual mode, and display standby.

  • BUILT-IN UNIVERSAL POWER SUPPLY

    More compact for easy operation.

  • ON-BOARD CONTROL

    On-board potentiometer to control the dimming level. 

  • DMX RDM CONTROL

    The RDM standard provides bi-directional feedback and the possibility to remotely assign and address all the fixtures in a DMX network. 

  • 16-bit ELECTRONIC DIMMING

    Fully dimmable 0 – 100 %. The 16-bit electronic driver ensures accurate and precise dimming.


  • Optimised combination of steel, die cast and aluminium for both sturdiness and lightweight
  • High-quality epoxy powder coating protects against corrosion
  • Side mounted pole operated focus mechanism easily repositioned to manual use
  • Stainless steel wire focus system for a smooth and precise focusing action, maintenance-free
  • High-efficiency convection cooling, super silent fan, 3 presetting fan speed
  • Easy to service and maintain
  • Compatibility of parts throughout the range
  • CE mark
  • Designed and manufactured in Italy

Ordering Codes

LD27262T/1 – Retrofit kit 200W Tungsten for Studio Fresnel 2kW supplied with upgrade label kit

LD27262D/1 – Retrofit kit 200W Daylight for Studio Fresnel 2kW supplied with upgrade label kit


RETROFIT KIT 200W FOR STUDIO FRESNEL 2kW

LD27262T/1 LD27262D/1

Operational Data

Power consumption

200 W

Supply voltage

100 – 260 Vac, 50 – 60 Hz, autosensing
Power factor (cosα) 0.97
Focus adjustment

Stainless steel, maintenance-free wire focus mechanism with a wire and pulley push/pull carriage travel system for spot and flood

Side mounted pole operated focus mechanism

IP rating

IP 20

Max operating ambient temperature

0° – 40°

Optical Data

Beam angle

16° to 71° (3200 K)

15° to 72° (5600 K)

Correlated color temperature Fixed 3200 K / 5600 K
CRI > 90

Mechanical Data

Finish

Black high-quality epoxy powder coating

Special extra high-temperature treatment in critical areas

External textured low gloss finish

Electrical

Dimming Electronic 16-bit, 0 – 100 % fully adjustable
Control Local via potentiometer
Remote via DMX-RDM
Setting, addressing and testing via control panel, via RDM, and via USB port                                              
Connections

DMX In and Through 5-Pin XLR

USB port for firmware and software upgrade 

Cabling

In-line switch 8 A / 250 V, 5 m bare ended cable, 3 x 1.5 mm2 section cable
Plugs and cables upon request

Dimensions

Weight 

4.9 kg 


Photometrics

Typical performance based on 3200 K
Spot (16°)
Distance (m) 3 4 5 7 9
Lux 6,360 3,578 2,290 1,168 707
Beam Ø (m) 0.84 1.12 1.41 1.97 2.53
Flood (71°)
Distance (m) 3 4 5 7 9
Lux 1,150 647 414 211 128
Beam Ø (m) 4.28 5.71 7.13 9.99 12.84

 

Typical performance based on 5600 K
Spot (15°)
Distance (m) 3 4 5 7 9
Lux 7,320 4,118 2,635 1,344 813
Beam Ø (m) 0.79 1.05 1.32 1.84 2.37
Flood (72°)
Distance (m) 3 4 5 7 9
Lux 1,310 737 472 241 146
Beam Ø (m) 4.36 5.81 7.27 10.17 13.08

 


RETROFIT KIT 200W FOR STUDIO FRESNEL 2kW

Data sheet
Retrofit kit 180W for Studio Fresnel 2kW

Get more information about this product!

Speak with us about any other questions you might have.


I Agree the Privacy Policy of this site *